VIAIR Quarter Duty Onboard Air System (12V, 120 PSI / 2.03 CFM Compressor, 2.0 Gal. Tank)

VIAIR Model 10002 is a quarter duty cycle 120 PSI onboard air system and is suitable for many pneumatic needs including smaller inflation tasks, air horns and much more. The 25% duty cycle onboard air system will operate for 10 minutes and will provide 30 minutes of cool down. Please Note: Use thread sealant for proper installation. Telfon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10-11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16-18 ft. lbs.

• 12 volts
• Permanent Magnetic Motor
• Sealed Design that will keep moisture and dust out
• Kit includes 2.0 Gallon VIAIR Air Tank, 275C VIAIR Air Compressor, Pressure Switch (90 PSI on and 120 PSI off), 40-amp Relay, 1/4" NPT 145 PSI Safety Valve, 1/4" Drain Cock, 1/4" Compression Fitting, 20 ft. 12 Gauge Wire with Inline Fuse Holder, Accessory Airline and Electrical Connections.
• 1 year warranty

• VIAIR 10002 Quarter Duty OnBoard Air System Install Manual
• VIAIR 10002 Quarter Duty OnBoard Air System Dimensional Drawing
• VIAIR 10002 Quarter Duty OnBoard Air System Wiring Diagram
• VIAIR 10002 Quarter Duty OnBoard Air System Plumbing Diagram

• Duty Cycle: 25% @ 100 PSI
• Max. Working Pressure: 120 PSI
• Max. Amp Draw: 18 Amps
• Ingress Protection Rating: IP54