VIAIR Constant Duty Onboard Air System (12V, 150 PSI Compressor, 2.5 Gal. Tank)

VIAIR Model 10005 is a constant duty cycle 150 PSI onboard air system that is pre-packaged solution that will provide 100% duty cycle 450C air compressor, a 2.5 gallon air tank and components that you will need for installation. Please Note: Use thread sealant for proper installation. Telfon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10-11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16-18 ft. lbs.

• 12 volts
• Permanent Magnetic Motor
• Sealed Design that will keep moisture and dust out
• Kit includes 2.5 Gallon VIAIR Air Tank, 450C VIAIR Air Compressor, 35 ft. Coil Hose with Tire Chuck, Dash Panel Gauge with On and Off Switch, Pressure Switch with Relay (110 PSI on and 145 PSI off), Reducer: 1/8" (F) to 1/4" (M), 1/4" Quick Connect Stud (F), 1/4" Quick Connect Coupler (F), 1/4" 175 PSI Safety Valve, 1/4" Drain Cock, 3 1/4" Compression Fittings, 20 ft. 12-Gauge Wire with Inline Fuse Holder, 4" Strip of Continuous Grommet Material, Accessory Airline and Electrical Connections.
• 1 year warranty

• VIAIR 10007 Constant Duty OnBoard Air System Install Manual
• VIAIR 10007 Constant Duty OnBoard Air System Dimensional Drawing
• VIAIR 10007 Constant Duty OnBoard Air System Wiring Diagram
• VIAIR 10007 Constant Duty OnBoard Air System Plumbing Diagram

• Duty Cycle: 100% @ 100 PSI
• Max. Working Pressure: 150 PSI
• Max. Amp Draw: 23 Amps