2" Suspension Lift Kit - 1988-1998 Chevy / GMC Truck 1500 4wd

The Tuff Country Chevy/GMC 2” lift kit uses front replacement torsion bar keys and rear add-a-leafs to lift your vehicle 2”. The torsion bar keys reindex the factory torsion bars which lifts the vehicle without cranking up the factory torsion bars. After the installation, the lift kit will keep the factory rake and the front end will be slightly lower than the rear.

• Simple bolt-on installation
• Adds 2" of lift to front & rear of your truck
• Maintains the factory rake look (rear end slightly higher than the front end)
• No need to "crank up" torsion bars
• Allows for more tire clearance

• New extended shocks are recommended for this lift kit.
• Torsion bar keys are designed to install with a stock suspension only. Do not use with other types of lift kits. Will void warranty.

2) Front Torsion Bar Keys, 2) Rear Add-a-leafs, 1) Hardware bag

The Tuff Country Toyota Tacoma 3” suspension lift kit offers an additional tire clearance to fit 32” tires. The kit includes Upper coil spring/strut spacers that lift the front of your vehicle and maintains the factory ride, cast iron blocks which lifts the rear of your vehicle. Note: You do not need to replace your existing factory struts. Tuff Country has been producing quality suspension products for over 20 years and backs all lift kits with a limited lifetime warranty.

• Upper coil / strut spacers maintain a near factory ride
• Front stock struts can be retained
• Rear cast iron blocks
• Allows use of 32" tires
• Rear stainless steel brake hose included

• Factory front & rear shocks must be replaced with new extended shocks to install this lift kit properly. Please choose shocks & boots above if you have not already purchased extended shocks.

2), Front strut spacers, 2) Front strut pre-load spacers, 6) Strut studs, 1) Rear brake line & bracket, 2) 3" cast iron rear lift blocks, 4) Rear ubolts, 2) Differential drop sleeves, 1) Hardware bag

Alternate Part #: 12933KN